Filter
Top Products
RX 1510-C/-I/-CI
– 53 –
Start Stop
FH I I00
100 1000
Example display function:
• F H 1100 Driving left forward with vibration forward
4.4.3 Cockpit display with cable control
Start / Stop function
Control mode Code
number:
Meaning:
F H 4010 "Start" key is activated. ► Starting procedure is initiated.
F H 4020 The motor has started. ► Release „Start” key.
F - 4050 This error message appears, if the "Start" key is released during
the starting procedure, the engine has not yet started and it is
set to start again immediately after releasing the "Start" key. This
function prevents the starter engaging, while the engine is still in
motion.
F H 4100 "Stop" key is activated. ► Stop procedure is initiated. ► The
machine controller waits, until the generator signal, the speed
signal and the oil pressure signal are not sent anymore.
F H 4200 Stop sequence is continued.
F H 4300 The operating hour meter is secured. K15 is then switched off.
F H 4400 The operating hour meter is saved.
Display and operating elements: