Filter
Top Products
RX 1510-C/-I/-CI
– 80 –
UK
S
S
TÖ TÖ
UK
SB
1) Check whether the transport protection is applied. ► If not, apply the transport
protection.
2) Check whether the shutdown yoke is in the transport position (activated). ► If
the shutdown yoke is not in the transport position, then press it downwards to the
chassis of the machine and secure it with the retaining band
SB
.
3) Put the chock blocks
UK
on both sides of the machine centrically under the drums.
7.5 Securing the machine for transport
► The chock blocks must be aligned opposite to each other, since the machine
could otherwise move in one direction.
4) Hook the shackles into the transport
S
eyebolts
TÖ
of the machine and eyebolts
of the transport vehicle; tighten the machine symmetrical crosswise on the
transport platform.
5) Check the load safeguard equipment again before transport.
6) Remove all loose items from the load and transport platform. ► Loose items can
fall off the vehicle when driving and endanger others.
Transport position
Loading and transporting the machine