Filter
Top Products
Tracer® SX5 50 Part No. 1110550
REMOVING/INSTALLING THE REAR WHEELS (FIGURE 6)
WARNING
If changing the size of the rear wheel or a change in the SEAT-TO-
FLOOR HEIGHT is desired, this procedure MUST be performed by a
qualified technician.
Ensure both rear wheels are the same size before using.
TRACER SX5 RECLINER ONLY: Mount the rear wheels in the Rear
Wheel Offset Bracket ONLY. NEVER reposition the rear wheels to the
forward position, as stability of the wheelchair will decrease, and injury or
damage may result.
REMOVING
1. Note mounting position of EXISTING rear wheel.
2. Remove the axle mounting screw and locknut that secure the EXISTING rear
wheel and spacer to the wheel offset bracket.
3. Remove the EXISTING rear wheel from wheel offset bracket.
INSTALLING
1. Secure the new/existing rear wheel and spacer to wheel offset bracket with axle
mounting screw and locknut. Securely tighten.
RECLINERSECTION 10
RECLINER
FIGURE 6 - REMOVING/INSTALLING THE REAR WHEELS
Rearward
Mounting
Position
Rear Wheel Offset Bracket
X
X
Forward
Mounting
Positions
(DO NOT USE)
Axle Mounting Screw
Rear Wheel
Spacer
Rear Wheel
Offset
Bracket
Locknut