Support User Manuals

Invacare Pronto M61 Mobility Aid User Manual

Open as PDF

of 80

SECTION 10—TOP SHROUD AND WHEELS

Pronto® M51™and M61™with SureStep® 58 Part No 1125085

FIGURE 10.2 Engaging/Disengaging Motor Release Lever

Replacing Front/Rear Caster Assemblies

NOTE:Forthisprocedure,refertoFIGURE 10.3.

NOTE:Frontandrearcasterassembliesarereplacedinthesamemanner.

NOTE:Whenreplacingthefront/rearcasterassemblies,itisnecessarytobracethecaster

assembliestopreventthewheelfromspinning.

1. Removethemountingscrew,twowashers,andlocknutthatsecuresthecastertothe

fork.

2. Removethecasteranddiscard.

3. Securenewcastertoforkwithexistingmountingscrew,tw owashersandlocknut

(FIGURE 10.3).Securelytighten.

FIGURE 10.3 Replacing Front/Rear Caster Assemblies

Disengaged

Right Motor

Release Lever

Shown

Engaged

Mounting

Screw

Caster

Locknut

Washer

Washer

previous next