Support User Manuals

Invacare Pronto M61 Mobility Aid User Manual

Open as PDF

of 80

SECTION 10—TOP SHROUD AND WHEELS

Part No 1125085 57 Pronto® M51™and M61™with SureStep®

FIGURE 10.1 Removing/Installing the Top Shroud

Engaging/Disengaging Motor Release Lever

ƽ WARNING

DO NOT engage or disengage the motor release lever until the On/Off switch on

the joystick is in the Off position.

CAUTION

Ensure both motor release levers are fully engaged before driving the wheelchair

NOTE:Forthisprocedure,refertoFIGURE 10.2onpage 58.

NOTE:Themotorlockdisengagement/engagementallowsfreewheelingorjoystickcontrolled

operation.Freewheelingallowsanattendanttomaneuverthewheelchairwithoutpower.

1. Locatethemotorreleasehandlesonthemotorsprotrudingthroughthetopshroudon

therearofthewheelchair.

2. Performone

ofthefollowing:

•ToDisengagetheMotorReleaseLevers‐Pullthemotorlocklevertowardstherear

ofthewheelchair(freewheelposition).

NOTE:Thisallowsthechairtofreewheelforpushing,ifnecessary.

NOTE:Itmaybenecessarytorockthewheelsslightlyuntilthemotorreleaseleverdisengages.

•ToEngagethe

MotorReleaseLevers‐Pushthemotorlockhandlestowardsthe

frontofthewheelchair(driveposition).

NOTE:Thisallowsthemotorstodrivethewheels.

NOTE:Itmaybenecessarytorockthewheelsslightlyuntilthemotorreleaseleverengages.

Top

Shroud

Front

Shroud

Base

Frame

Hook and

Loop

Strap

Hook and

Loop Strap

Joystick Cable

and Connector

Center

Hole in

Top

Shroud

NOTE:Batteriesnot

shownforclarity.

DETAIL “A” - M61 TOP SHROUD

Clip

previous next