Filter
Top Products
SECTION 8—FOOTBOARD ASSEMBLY
Pronto® M51™and M61™with SureStep® 46 Part No 1125085
Installing
ƽ WARNING
Make sure the detent balls of the quick-release pin are fully released beyond the
outer edge of the tube before operating the wheelchair. Otherwise, injury and/or
damage may result.
Keep detent balls clean.
1. Positionthefootboardassemblyontothewheelchairframesothatthemountinghole
inthewheelchairframealignswiththedesiredmountingholeinthefootboard
assembly.
2. Installthequickreleasepinbydepressingthebuttonwhileslidingthepinin.Ensure
thatthedetentballsofthequickreleasepinarefullyreleasedbeyondtheouteredge
ofthetube(Detail“A” ofFIGURE 8.1).
FIGURE 8.1 Removing/Installing the Footboard Assembly
Adjusting the Footboard Assembly
Angle
NOTE:Forthisprocedure,refertoFIGURE 8.2onpage 47.
1. Loosenthejamnutandsetscrewlocatedunderneathonthebacksideofthefootplate.
2. Adjustthesetscrewinorouttoobtainthedesiredfootboardassemblyangle.
3. Threadthejamnutandwasherinwarduntilitisflushwiththefootboardbracket.
4. Securelytightenthejamnutandwashertosecurethemountingscrewinplace.
DETAIL “A” - BOTTOM VIEW OF
FOOTBOARD
Quick
Release Pin
Detent
Ball
Footboard
Assembly
Mounting Hole
Top Shroud
Quick Release Pin
Outer Edge
of Tube
Detent Balls
Pinch Point