Support User Manuals

Invacare Pronto M61 Mobility Aid User Manual

Open as PDF

of 80

SECTION 5—WHEELCHAIR OPERATION

Pronto® M51™and M61™with SureStep® 34 Part No 1125085

On/Off Button

Thisbuttonislocatedatthefrontofthejoystickhousing.Itisusedtoturnthewheelchair

onandoff,toremovethejoystickfromsleepmode(ifprogrammed)andtolockorunlock

thejoystick(ifprogrammed).

Speedometer

Thespeedometerisusedtoshowthemaximumspeed.Theright‐mostLEDindicates

currentmaximumspeedsetting.ThebottomleftGREENLEDflashestoindicatethatthe

joystickisinspeedlimitmode.Speedlimitmodelimitsthedrivespeedtoapre‐

programmedvalue,typicallywhentheseathasbeenelevatedandthewheelchairis

requiredtodriveat20%speed.

Speed Control Buttons

Thespeedcontrolbuttons(tortoisebutton()andharebutton()areusedtosetand

adjustthemaximumspeed.

1. Toadjustthespeed,performoneofthefollowing:

•AdjustSpeedin20%Increments(5SpeedMode)‐Pressthetortoisebutton()

orharebutton()todecrease/increasethespeedin20%increments.Thelarger

barsinthespeedometerwilllight.

•AdjustSpeedinSmallerIncrements(VSPMode)‐Performthefollowingsteps:

i. Pressandholdboththetortoisebutton()andharebutton()untilthe

joystickbeeps.

ii. Performoneofthefollowing:

•Pressthetortoisebutton()orharebutton()todecrease/increasethe

speedin20%increments.Thelargerbarsinthespeedometerwilllight.

•Pressandholdthetortoisebutton()orharebutton()todecrease/

increasethespeedinsmallerincrements.Thesmallerbarsinthe

speedometerwilllight.

Mode Button

NOTE:ThemodebuttonispresentontheSPJ+w/ACCjoystickonly.

Pressthemodebuttontoswitchfromdrivingmodetoelevatemode.RefertoElevating

theSeatonpage 31.

previous next