Support User Manuals

Invacare Pronto M61 Mobility Aid User Manual

Open as PDF

of 80

SECTION 7—SEAT

Pronto® M51™and M61™with SureStep® 40 Part No 1125085

SECTION 7—SEAT

ƽ WARNING

After any adjustments, repair or service and before use, make sure that all attaching

hardware is tightened securely - otherwise injury or damage may result.

Before performing any maintenance, adjustment or service verify that On/Off

switch on the joystick is in the Off position.

Adjusting the Back Angle

Semi-Recline Back Angle

NOTE:Forthisprocedure,refertoFIGURE 7.1.

1. Liftuponthereleasehandleandadjustseattodesiredangle.

2. Letgoofthereleasehandletolockthebackinposition.

FIGURE 7.1 Adjusting the Back Angle - Semi-Recline Back Angle

Fold Down Back Angle

NOTE:Forthisprocedure,refertoFIGURE 7.2onpage 41.

1. Removethetwoshoulderboltsandlocknutsfromtheseathingesoneithersideofthe

seat.

2. SelectoneofthefourbackanglepositionsasshowninDetail“A ”ofFIGURE 7.2on

page 41.

3. Reinstallandtightenthetwoshoulderboltsandlocknuts

throughthedesiredback

anglesettingoneachseathinge.

NOTE:Bothseathingesshouldbesettothesamebackanglesetting.

Release Handle

NOTE:Officestylevan seat

isshown.Standardvanseat

operatesthesameway.

Office Style

Van Seat

previous next