Filter
Top Products
12 OPTIONS
Part No 1110546 61 Invacare® Tracer™ EX2 Wheelchair
12.2 Installing Crutch and Cane Carrier
1. Slide the clamp with the base attached over the end of the step tube of the wheelchair. Ensure the base is towards the inside of the wheelchair.
2. Position the base parallel to the step tube.
3. Securely tighten the locknut that secures the base to the step tube
of the wheelchair.
4. Remove the upper back upholstery screw and washer.
5. Align the strap with the back upholstery screw mounting hole.
6. Reinstall the back upholstery screw and washer and secure the
strap to the wheelchair.
7. The base cleans easily with any chrome or glass cleaner. The strap
can be cleaned with mild soap and water.
FIGURE2 Installing Crutch and Cane Carrier
ƽ
WARNING
Check base weekly to ensure proper placement.
When loading the crutch/cane carrier, ensure items are securely placed into the base. Also ensure that there is no
interference with folding the wheelchair, the rear wheels, or the swing-back arms.
Strap MUST be securely fastened while carrying items.
NEVER insert or remove items while wheelchair is moving.
ƽ
CAUTION
Base should be parallel to step tube to avoid
bending spokes when folding the wheelchair.
Step Tube
Locknut
Clamp
Base
Strap