Invacare 1110546 Wheelchair User Manual


 
10 ANTI-TIPPERS/WHEEL LOCKS
Invacare® Tracer™ EX2 Wheelchair 54 Part No 1110546
10.2 Using/Adjusting Patient Operated Wheel Locks
Using Patient Operated Wheel Locks
1. See Detail “A” for instructions on Push-to-Lock. Refer to Detail “B” for instructions on Pull-to-Lock.
2. Disengage the wheel locks by reversing the directions in STEP 1.
FIGURE3 Using Patient Operated Wheel Locks
ƽ
WARNING
DO NOT attempt to stop a moving wheelchair with wheel locks. Wheel locks are not brakes.
If the wheelchair is equipped with push to lock wheel locks, elevating legrests, and wheel lock extension handles, the wheel
lock extension handles MUST be removed before swinging the elevating legrests to the side, otherwise injury or damage
may result. Interference between the top of the elevating legrest and the wheel lock extension handle may cause the wheel
lock to disengage.
Position wheelchair on a flat, level surface to perform this procedure. Ensure the wheelchair is not moving before engaging
the wheel locks.
Detail “A” Push-To-Lock
Detail “B” - Pull-To-Lock
Unlocked Position
Locked Position
Wheel Lock
Push wheel lock
handle forward away
from the tire to
engage wheel lock
Pull wheel lock
handle toward the
tire to disengage
wheel lock
Pull wheel lock
handle backward
toward the tire to
engage wheel lock
Push wheel lock
handle away from
the tire to disengage
wheel lock
Unlocked Position
Wheel Lock
Locked Position