Filter
Top Products
4 SAFETY INSPECTION/TROUBLESHOOTING
Invacare® Tracer™ EX2 Wheelchair 24 Part No 1110546
4 Safety Inspection/Troubleshooting
4.1 Safety Inspection Checklist
Initial adjustments should be made to suit your personal body structure and preference. Thereafter follow these maintenance procedures:
Inspect/Adjust Initially
❑ Ensure that the wheelchair rolls straight (no excessive drag or pull to one side).
❑ Inspect for loose or missing hardware on frame and crossbraces.
❑ Inspect for bent frame or crossbraces.
❑ Check that the wheel locks DO NOT interfere with tires when rolling.
❑ Check that the wheel lock pivot points are free of wear and looseness.
❑ Check that the wheel locks are easy to engage.
❑ Ensure that the wheel locks prevent the wheelchair from moving when engaged.
❑ Inspect the seat and back for rips and sagging.
❑ Inspect the seat and back for loose or broken hardware.
❑ Inspect the back cane hand grips for wear/looseness/deterioration.
❑ Ensure seat postioning strap buckle latches. Verify hardware that attaches strap to frame is secure and undamaged. Replace if necessary.
❑ Inspect tires for flat spots and wear.
❑ Check pneumatic tires for proper inflation.
Every six months or as necessary, take your wheelchair to a qualified technician for a thorough inspection and servicing.
Regular cleaning will reveal loose or worn parts and enhance the smooth operation of your wheelchair. To operate
properly and safely, your wheelchair MUST be cared for just like any other vehicle. Routine maintenance will extend the life
and efficiency of your wheelchair.