Filter
Top Products
To navigate and use the OSD menu:
1. Press the Menu button once to open the menu on the display, The menu opens with
the Quick Setup submenu (see figure 3).
Figure 3. OSD Menu — Quick Setup Submenu
2. If the desired submenu is not showing, use the Adjust knobs ({, [) to navigate to
the desired menu.
3. Press the Enter button to access the submenu.
4. Rotate either Adjust knob to cycle through the submenu to the desired option.
5. Press the Enter button to access the submenu item.
6. Rotate either Adjust knob to adjust the value as desired.
7. Press Enter to accept the new value. Press it again if action confirmation is required.
8. Press Menu to exit the sub menu. Press it again to exit and close the main menu.
NOTE: In any submenu, values that do not apply to the current input will be
shown as “N/A”.
Quick Setup Submenu
This submenu (see figure 3 above) allows the user to make basic configuration
adjustments to the DSC 301 HD.
The configurable variables are:
Auto-Image — Select this to start a one-time Auto-Image on the current input.
INx: Input Format — Select this to change the input format.
NOTES:
• “INx” refers to the selected input; for example “Input 2”, as shown in
figure 4.
• View only for inputs 1 (composite video) and 3 (HDMI), selectable for input 2
(RGB or YUV).
DSC 301 HD • Operation 9