Filter
Top Products
WARRANTY
Emerson Process Management warrants that the equipment manufactured
and sold by it will, upon shipment, be free of defects in workmanship or
material. Should any failure to conform to this warranty become apparent
during a period of one year after the date of shipment, Emerson Process
Management shall, upon prompt written notice from the purchaser, correct
such nonconformity by repair or replacement, F.O.B. factory of the defective
part or parts. Correction in the manner provided above shall constitute a
fulfillment of all liabilities of Emerson Process Management with respect to the
quality of the equipment.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL
OTHER WARRANTIES OF QUALITY WHETHER WRITTEN, ORAL, OR
IMPLIED (INCLUDING ANY WARRANTY OF MERCHANTABILITY OF
FITNESS FOR PURPOSE).
The remedy(ies) provided above shall be purchaser's sole remedy(ies) for
any failure of Emerson Process Management to comply with the warranty
provisions, whether claims by the purchaser are based in contract or in tort
(including negligence).
Emerson Process Management does not warrant equipment against normal
deterioration due to environment. Factors such as corrosive gases and solid
particulates can be detrimental and can create the need for repair or
replacement as part of normal wear and tear during the warranty period.
Equipment supplied by Emerson Process Management but not manufactured
by it will be subject to the same warranty as is extended to Emerson Process
Management by the original manufacturer.
At the time of installation it is important that the required services are supplied
to the system and that the electronic controller is set up at least to the point
where it is controlling the sensor heater. This will ensure, that should there be
a delay between installation and full commissioning that the sensor being
supplied with ac power and reference air will not be subjected to component
deterioration.
3837
3/06