99
•Always On
— VoiceSignal always displays a choice list, even when
there is only one choice.
•Always Off
— VoiceSignal never displays a choice list.
3. Press the
OK
soft key or
press
to accept the new
setting. Press to discard the new setting and return
to the
Voice Settings
menu.
Sensitivity
1. From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Sensitivity
.
2. Use the Up and Down navigation keys to adjust the
selected Sensitivity setting incrementally between
Reject
More
spoken commands or names and
Reject Less
spoken
commands or names.
3. Press the
OK
soft key or
press
to accept the new
setting. Press to discard the new setting and return
to the
Voice Settings
menu.
Digit Dialing
If you regularly have trouble with VoiceSignal not recognize the
numbers you say, try adapting digit dialing to your voice.
Adapting can improve the accuracy of digit recognition,
especially for people with strong regional accents.
Note:
After you adapt Digit Dial, your phone is customized to your voice, and
your voice only. Others will not be able to use it unless they reset the
phone to factory defaults.
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
Tips for Adapting Digit Dialing:
•
Use Adapt Digits in a quiet place.
•
Make sure you wait for the beep before starting to speak.
•
Speak clearly, and say each digit distinctly.
•
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing will not work as well for other people
using your phone. (You can always reset digit adaptation to its original
state, as described below.)
Adapt Digits
To adapt digit dialing, do the following:
1. From the
Tools
menu, select
Voice Service
➔
Voice Settings
➔
Digit Dialing
➔
Adapt Digits
. Your phone displays text
describing the Adapt Digits process.
