Page 208 Epson Research and Development
Vancouver Design Center
S1D13708 Hardware Functional Specification
X39A-A-001-02 Issue Date: 02/03/07
upper and lower bytes). The bit/Little endian setting is used to determine the data ar-
rangement for word accesses only.
The S1D13708 indirect interface implements an auto increment function to allow
burst memory accesses. For byte accesses, the Memory Address Pointer registers
(REG[C0h], REG[C1h], REG[C2h]) are automatically incremented “+1”. For word
accesses, the Memory Address Pointer registers are automatically incremented “+2”.
Note
If the Memory Access Select bit is enabled (REG[C6h] bit 0 = 1), all memory accesses
are word accesses (WRU# is ignored). Therefore, the memory address set in REG[C0h]
through REG[C2h] must be an even address.
