A SERVICE OF

logo

648
Occupied Bandwidth Measurement
View/Display
The number of active carriers is displayed. Since span is determined from detected carriers in auto mode,
it is necessary to show how many carriers are identified as active., as highlighted above.
When there is one active carrier, Transmit Freq Error is displayed. Otherwise, “---“ is displayed, as
shown above.
Display
Accesses a menu of functions that enable you to set the display parameters.
See “Display” on page 1393 for more information.
Key Path: Front-panel key
Initial S/W Revision: Prior to A.02.00
Key Path:
View/Display
Initial S/W Revision: Prior to A.02.00