415
ACP Measurement
Meas Setup
Filter Alpha for Carrier
Inputs the alpha value for the filter used in the current carrier configuration.
Mode WCDMA, WIMAX OFDMA, TD-SCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:LIST:FILTer[:RRC][:STATe]
ON|OFF|1|0, …
[:SENSe]:ACPower:CARRier[1]|2:LIST:FILTer[:RRC][:STATe]
?
Example ACP:CARR:LIST:FILT 0,0,0,0
ACP:CARR:LIST:FILT?
Notes The binary values translate as follows:
1|ON = RRC Weighted
0|OFF = Integ BW
Maximum of Array length depends on the number of carriers.
You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
Preset LTE, LTETDD: OFF
WCDMA: ON
WIMAX OFDMA: OFF
TD-SCDMA: ON
State Saved Saved in instrument state.
Range IntegBW|RRC Weight
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path
Meas Setup, Carrier Setup, Configure Carriers, Method, RRC Weighted
Mode WCDMA, WIMAX OFDMA, TD-SCDMA, LTE, LTETDD
Remote Command [:SENSe]:ACPower:CARRier[1]|2:LIST:FILTer:ALPHa <real>,
…
[:SENSe]:ACPower:CARRier[1]|2:LIST:FILTer:ALPHa?
Example ACP:CARR2:LIST:FILT:ALPH 0.5
ACP:CARR2:LIST:FILT:ALPH?
Notes You must be in the mode that includes ACP measurements to use this
command. Use :INSTrument:SELect to set the mode.
