456
ACP Measurement
Sweep/Control
Pause
Pauses a measurement after the current data acquisition is complete. When Paused, the label on the key
changes to Resume. Pressing the Resume key resumes the measurement at the point where it was paused.
When Paused, pressing
Restart, Single, or Cont does a Resume.
See “Pause/Resume” on page 1279 for more details.
Gate
Accesses a menu that enables you to control the gating function. The Gate functionality is used to view
signals best viewed by qualifying them with other events.
Gate Method that lets you choose one of the three different types of gating is not available in this
measurement.
See “Gate ” on page 1280 for more details.
Points
Sets the number of points per sweep, from 1 to 20001. The sweep time resolution setting will depend on
the number of points selected.
Example ACP:SWE:TIME:AUTO:RUL NORM
ACP:SWE:TIME:AUTO:RUL?
Notes Set to Norm when Auto Couple is pressed or sent remotely.
Preset WCDMA, C2K, TD-SCDMA, 1xEVDO, LTE, LTETDD: ACCuracy
WIMAX OFDMA: NORMal
State Saved Saved in instrument state.
Range Norm|Accy
Initial S/W Revision Prior to A.02.00
Modified at S/W Revision A.02.00, A.03.00
Key Path
Sweep/Control
Initial S/W Revision Prior to A.02.00
Key Path
Sweep/Control
Initial S/W Revision Prior to A.02.00
Key Path
Sweep/Control
Mode WCDMA, C2K, WIMAX OFDMA, 1xEVDO, LTE, LTETDD
