Filter
Top Products
Foreword
Test Bed Receiver Subsystem Addendum – Rev 1 vii
FOREWORD
SCOPE
The Test Bed Receiver Subsystem Addendum is written for users of the Test Bed Receiver Subsystem and contains
information specific to the TESTBEDW and TESTBEDGLO software models.
This manual describes the NovAtel Test Bed Receiver Subsystem in sufficient detail to allow effective integration and
operation. The manual is organized into sections, which allow easy access to appropriate information.
It is beyond the scope of this manual to provide service or repair details. Please contact your NovAtel Service Center for
any customer service inquiries.
PREREQUISITES
The Test Bed Receiver is a stand-alone fully functional GPS and Test Bed Receiver. Refer to Chapter 2, Installation of
Test Bed Receiver for more information on installation requirements and considerations.
The NovAtel Test Bed Receiver module utilizes a comprehensive user interface command structure, which requires
communications through its serial (COM) ports. To utilize the built-in command structure to its fullest potential, it is
recommended that some time be taken to review and become familiar with commands and logs in the MiLLennium
Command Descriptions Manual before operating the Test Bed Receiver.