Filter
Top Products
Appendices
30 Test Bed Receiver Subsystem Addendum – Rev 1
C WAAS COMMANDS AND LOGS
These commands and logs differ from the versions described in the MiLLennium Command Descriptions Manual for the
Test Bed Receiver at the time of this publication.
COMMANDS
CONFIG
This command switches the channel configuration of the GPSCard between pre-defined configurations. When invoked,
this command loads a new satellite channel-configuration and forces the GPSCard to reset. The types of configurations
possible are listed by entering this command:
HELP CONFIG
In some applications, only the standard (default) configuration will be listed in response. The standard configuration of a
MiLLennium GPSCard consists of 12 L1/L2 channel pairs.
Syntax:
CONFIG
cfgtype
Command
Option Description Default
CONFIG Command
cfgtype (none) Displays present channel configuration
configuration
name
Loads new configuration, resets GPSCard:
TESTBEDW WF2L1L2 8 L1/L2 + 2 WAAS FEC
WF1L1L2 10 L1/L2 + 1 WAAS FEC
L1L2 12 L1/L2
MiLLen-STD STANDARD 12 GPS
WAASCORR 10 GPS + 1 WAAS
WAASCORR2 8 GPS + 2 WAAS
WF2L1L2 for TESTBEDW
STANDARD for MiLLen-STD