Filter
Top Products
30
5. Assembly
Fig. 34 Rear side of stand Leica DM4000 B/M
1 Power switch
2 Power supply
1
2
After completing the assembly work, connect
the stand to the power supply using the power
cable (Fig. 34.2).
5.12 Connection to the CTR5000 Electronics Box
Only for the Leica DM5000 B:
• Connect the microscope (36.1) to the
"Microscope" jack (35.1) on the rear of the
electronics box. Use the cable with the 25-pin
plug.
• Connect the electronics box to the power sup-
ply using the power cable (35.2).
Fig. 35 Rear side of electronics box CTR5000
1 Microscope connection
2 Power supply
Fig. 36 Rear side of stand Leica DM5000 B
1 Connection to the CTR5000 electronics box
1
2
1
2