Filter
Top Products
17
5. Assembly
• From above, set the stage clamp onto the
dovetail guide (4.2) and push the stage down-
wards until the upper end of the dovetail guide
is tightly fastened to the upper end of the
stage clamp.
• Firmly tighten the stage clamp (4.1).
Note:
For thicker specimens (Leica DM4000 M) the
stage can be set to a correspondingly lower
level.
1
2
Fig. 4 Assembling the stage
1 Stage clamp
2 Dovetail guide
5.1 Stage
Caution:
Before assembling the stage, make sure no ob-
jectives are installed!
• Place the specimen holder on the stage and
fasten it with the two screws (3.1).
• Using the condenser height adjuster (3.2), turn
the condenser holder completely upwards, i.e.
as close to the stage as possible.
• Loosen the stage clamp (3.3) slightly.
!
23
1
Fig. 3 Mechanical object stage
1 Locking screws for specimen holder
2 Condenser height adjuster
3 Stage clamp