Support User Manuals

Invacare 1143206 Mobility Aid User Manual

Open as PDF

of 72

SECTION 7—ARMS

Part No. 1143206 35 Pronto® M41 with SureStep®

Adjusting the Arms

Adjusting Width

NOTE:Forthisprocedure,refertoFIGURE 7.2.

1. Loosenthetwolockknobsthatsecurethearmstothearmsupporttube.

NOTE:Botharmsshouldbeadjustedtothesamedistanceawayfromthearmsupporttube.

NOTE:Changingthewidthofthearmsmayalsoaffecttheoverallwidthofthe

wheelchair.

2. Repositionthearmsuntildesiredwidthisachieved.

3. Securelytightenthetwolockknobsthatsecurethearmstothearmsupporttube.

FIGURE 7.2 Adjusting Width

Adjusting Angle

ƽ WARNING

Pinch point may occur when adjusting

the arm angle position.

NOTE:Forthisprocedure,referto

FIGURE 7.3.

1. Liftupthearmpad.

2. Loosenthejamnut.

3. Adjustthesocketscrewupordownto

thedesiredarmangleposition.

FIGURE 7.3 Adjusting Angle

4. Tightenthejamnut.

5. Todeterminethesameanglefortheoppositearmpad,counttheexposedthreadsafter

thejamnuthasbeentightened.

6. RepeatSTEPS1‐5foroppositearmrest,ifnecessary.

Arm

Lock Knob

Arm Support Tube

Seat

NOTE:Semi‐Recline

Backseatshown.Fold

DownBackseatsadjusts

thesameway.

Arm Pad

Adjustment

Screw

Jam Nut

Count Exposed Thread

Pinch Point

previous next