Support User Manuals

Invacare 1143206 Mobility Aid User Manual

Open as PDF

of 72

SECTION 10—FRONT RIGGINGS

Pronto® M41 with SureStep® 46 Part No. 1143206

Model PH904A and PHAL4A

NOTE:Forthisprocedure,refertoFIGURE 10.3.

NOTE:PH904Astylefrontriggingshown.PHAL4Afrontriggingadjustthesameway.

1. Loosen,butdonotremovethelugbolt

andlocknutthatsecurethelower

footresttothefootrestsupport.

2. Repositionthelowerfootresttothe

desiredheight.

3. Securelytightenthelugboltand



locknutthatsecurethelowerfootrestto

thefootrestsupport.

4. RepeatSTEPS1‐3fortheoppositeside

ofthewheelchairfootrest,ifnecessary.

FIGURE 10.3 Adjusting Footrest Height -

Model PH904A and PHAL4A

Replacing Heel Loops

NOTE:Forthisprocedure,refertoFIGURE 10.4.

1. Notethepositionofhexbolt,coved

washersandlocknutforreinstallation.

2. Removethehexbolt,covedwashers

andlocknutthatsecurethelower

footresttothefootrestsupport.

3. Removethelowerfootrest.

4. Removethephillips

®

bolt,spacerand

locknutthatsecuretheexistingheel

looptothelowerfootrest.

5. Slidetheexistingheelloopoffthe

lowerfootrest.

6. Replaceheelloop.

7. ReverseSTEPS1‐6toreassemble.

FIGURE 10.4 Replacing Heel Loops

NOTE:Whensecuringheellooptolowerfootrest,tightenthephillipsscrewandlocknutuntilthe

spacerissecure.

Locknut

Footrest

Support

Lower

Footrest

Lug Bolt

Coved

Washer

Hex Bolt

Footrest

Support

Coved

Washer

Locknut

Lower

Footrest

Phillips

Bolt

Locknut

Spacer

Heel Loop

Locknut

previous next