Support User Manuals

Invacare 1143206 Mobility Aid User Manual

Open as PDF

of 72

SECTION 9—FOOTBOARD ASSEMBLY

Part No. 1143206 41 Pronto® M41 with SureStep®

FIGURE 9.1 Removing/Installing the Footboard Assembly

Adjusting the Footboard Assembly

Angle

NOTE:Forthisprocedure,refertoFIGURE 9.2.

1. Loosenthejamnutandsetscrewlocatedunderneathonthebacksideofthefootplate.

2. Adjustthesetscrewinorouttoobtainthedesiredfootboardassemblyangle.

3. Threadthejamnutandwasherinwarduntilitisflushwiththefootboardbracket.

4. Securelytightenthejamnutandwashertosecurethemountingscrewinplace.

FIGURE 9.2 Adjusting the Footboard Assembly - Angle

Quick Release Pin

Detent

Ball

Footboard

Assembly

Mounting

Hole

Shroud

DETAIL “A” - TOP VIEW

OF FOOTBOARD

Quick

Release Pin

Outer Edge of Tube

Detent Balls

Set Screw, Washer

and Jam Nut

Footboard Assembly

previous next