Support User Manuals

Invacare 1143206 Mobility Aid User Manual

Open as PDF

of 72

SECTION 11—SHROUD AND WHEELS

Part No. 1143206 53 Pronto® M41 with SureStep®

Removing/Installing Forks and/or Caster Assemblies

NOTE:Forthisprocedure,refertoFIGURE 11.4.

NOTE:Frontandrearforksarereplacedinthesamemanner.

Removing

1. Removethecasterfromtheforkifnecessary.RefertoRemoving/InstallingCasterson

page 51.

2. Removetheheadtubecap.

3. Removelocknut,washerandspacersecuringtheforktotheheadtube.

Installing

1. Insertthreadedpostofforkintoheadtube.

NOTE:Checkthebearingassemblies.Replaceifnecessary.

2. Slidetheforkcompletelyintoheadtube.

3. Secureforktoheadtubewithlocknut,washer,andspacer.Securetightly.

ƽ WARNING

Improper positioning of the washer will prohibit the free movement of the forks

which may result in injury to the occupant.

4. Installthecasterontotheforkifremoved.RefertoRemoving/InstallingCasterson

page 51.

5. Installheadtubecap.

Adjusting Anti-Dive Springs

ƽ WARNING

DO NOT attempt to replace or adjust the anti-dive springs. This procedure MUST

be performed by a qualified technician.

NOTE:Theanti‐divespringsmaybeadjustedaccordinglytousersweight.

previous next