Support User Manuals

Invacare 1143206 Mobility Aid User Manual

Open as PDF

of 72

SECTION 12—ELECTRONICS

Part No. 1143206 55 Pronto® M41 with SureStep®

FIGURE 12.1 Removing/Installing the Joystick Assembly

Repositioning the Joystick

NOTE:Forthisprocedure,refertoFIGURE 12.2.

NOTE:Takenoteofpositionandorientationofmountinghardwareforreinstallingthejoystick

assembly.

1. Removethejoystickassemblyfromthewheelchair.RefertoRemoving/Installingthe

JoystickAssemblyonpage 54.

2. Removethethreehexmountingscrews,spacersandlocknutsthatsecurethe

mountingbrackettothethreemountingholesonthearmframe.

NOTE:Themountingbracketismountedtotheinsideofthearmframe.

3. Repositionthemountingbracketontheoppositearmframe.

4. Usingthethreehexmountingscrews,spacersandlocknutssecurethemounting

brackettothethreemountingholesofthearmframe.

5. Ifnecessary,performthefollowingtorepositiontheadjustmentlock:

A. Slidetheadjustmentlockfromthemountingbracket.

B. Rotateadjustmentlock180°andslideadjustmentlockovertheoppositeendofthe

mountingbracket.

6. Reinstallthejoystickassemblyontothewheelchair.RefertoRemoving/Installingthe

JoystickAssemblyonpage 54.

FIGURE 12.2 Repositioning the Joystick

Joystick

Joystick

Mounting

Tube

Mounting

Screws

Mounting Bracket and

Adjustment Lock Lever

Seat

Arm

Joystick

Seat

Joystick Cable

Tie-wraps

Here

Arm

DETAIL “A” - STRAP LOCATIONS

Hex Mounting Screws

Locknuts

Adjustment Lock Lever

Mounting Bracket

Armrest Plate

Spacers

Mounting Holes on Arm

Frame

previous next