Filter
Top Products
Reference Manual
00809-0100-4027, Rev AA
December 2005
Rosemount 4500
www.rosemount.com
Section 2 Installation
Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-2
Installation Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-4
Installing the LCD Meter . . . . . . . . . . . . . . . . . . . . . . . . . . . page 2-8
OVERVIEW The information in this section covers installation considerations. A Quick
Installation Guide (document number 00825-0100-4027) is shipped with
every transmitter to describe basic pipe-fitting and wiring procedures for initial
installation. Dimensional drawings for each Rosemount 4500 variation and
mounting configuration are included in Appendix A: Reference Data.
HART Communicator and AMS instructions are given to perform configuration
functions. For convenience, HART Communicator fast key sequences are
labeled “Fast Keys” for each software function below the appropriate
headings.
SAFETY MESSAGES Procedures and instructions in this section may require special precautions to
ensure the safety of the personnel performing the operation. Information that
raises potential safety issues is indicated with a warning symbol ( ). Refer
to the following safety messages before performing an operation preceded by
this symbol.
Warnings
Electrical shock can result in death or serious injury.
• Avoid contact with the leads and terminals.
Process leaks could result in death or serious injury.
• Install and tighten all clamps and flanges before applying pressure.
• Do not attempt to loosen or remove clamps or flanges while the transmitter is
in service.