Filter
Top Products
Page 2 - 8 ITW Dynatec c. 1999
Revised 12/99 TPC-2 TIMER Manual #50-05
Important Note:
The TPC-2 is usually connected to non-polarity-sensitive solenoids using the ITW
Dynatec Output Kit (L21754) supplied as a part of the TPC-2 Control Unit Kit. As such,
it is not important to which terminal the two wires of the Output Kit cables are connected.
Polarity Sensitive solenoids, such as ITW Dynatec P/N 030A057 require attention to the
manner in which the Output Kit wires are connected. It is imperative that the White Wire
be connected to the solenoid’s “positive” (+) terminal and the Black Wire be connected to
the “negative” (-) terminal. Failure to do so will render the solenoid valve inoperative and
may cause damage to both the TPC-2 Control Unit and the solenoid valve.