Filter
Top Products
4-40
Adaptec SCSI RAID 2120S/2200S Software User’s Guide
Enclosure Commands
The enclosure commands operate on enclosure management
devices that support Version 1.0 of the SCSI Accessed
Fault-Tolerant Enclosures (SAF-TE) specification. If you are not
using an enclosure, the following commands will not be available.
Command Summary:
enclosure activate slot {enclosure} {slot}
Activates a device in a slot in the SAF-TE enclosure.
Parameters
{enclosure}—ID associated with the enclosure
management device on which to activate a device.
{slot}—Unit number associated with the slot.
enclosure identify slot [/stop{=boolean}]
{enclosure} {slot}
Identifies a device in the enclosure.
Parameters
{enclosure}—ID associated with the enclosure
management device on which to identify a slot.
{slot}—Unit number associated with the slot.
Switches
/stop—Specifies whether to stop identifying the slot.
enclosure list [/all{=boolean}] [/full{=boolean}]
[{enclosure}]
Lists components for one or all enclosure devices.
Parameters
{enclosure}—ID associated with the enclosure
management device whose associated components to
display.
Switches
/all—Lists all enclosures on the system.
/full—Displays detailed component information.
UG.book Page 40 Saturday, October 26, 2002 12:08 PM