Filter
Top Products
32
2-7-1 Retrieving Data from the Monitor
Figure 19: Recorder-Retrieve Data dialog box
See below for the description of each field on the Recorder-Retrieved Data dialog box.
Field Description
Recorder ID Recorder ID is set in the monitor’s memory prior to the monitoring
session.
Start Date Date of first measurement in the monitor’s memory.
Start Time Time of first measurement in the monitor’s memory.
Patient Name Field for the patient’s name.
Convert Data Creates a CSV file automatically when checked.
Status Status line offers comments on the present stage of the data retrieving
process, e.g. “connected” or “retrieving data”.
With the monitor and the processor connected to the computer, you may retrieve data from the
monitor by completing the steps below:
Step 1 Select the Recorder menu.
Step 2 Select the Retrieve data sub-menu.
Step 3 Select the Patient name field and input the patient’s name. The name will appear in
the Name field on the Patient Information screen.
Note: You must input a patient name or the data can not be retrieved. To exit the
Retrieve Data dialog box prior to retrieving the data, click the Windows™ close
button in the top right corner of the Recorder–Retrieve Data dialog box.
Step 4 Click the Retrieve Data button.
Step 5 Select the File Name field and enter a file name.
Step 6 Select the Drive and Directory where the file should be saved.