Section 9: Settings 79
Security Settings
Security Settings
The Security feature enables you to restrict the use of your phone by others and to restrict the types of
calls. Various codes and passwords are used to protect the features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter your PIN each time the phone is switched on.
Consequently, any person who does not have your PIN cannot use your phone without your permission.
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you switch it on.
• Enable: you must enter the PIN each time the phone is switched on.
Change PIN
This feature allows you to change your current PIN, provided the PIN Check feature is enabled.
You must enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Change password
This feature allows you to change your current password to a new one. It is preset to 00000000 at the
factory.
1. Enter the default password, 00000000, and press the OK soft key or .
2. Enter a new 4- to 8-digit password and press the OK soft key or .
3. Enter the new password again and press the OK soft key or .
FDN mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in the Phonebook. You must enter your PIN2.
You can obtain your PIN2 from your service provider.
