114
Digit Dialing
Digit Dial allows you to dial any phone number by simply speaking the digits into the phone. No training
is necessary, and Digit Dial is programmed to understand natural speech.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation key). You can also select
Voice recognition from the Utilities menu in Applications.
2. After a brief pause, a list of optional commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Call” and the area code and number that you want to dial at a distance of 3-12 inches
from the phone in a natural voice.
4. If VoiceSignal is not sure of the number that you said, a list of possible matches appears on
the display. You are asked to confirm the correct number as VoiceSignal displays the results.
Say “Yes” or “No” to confirm or reject the number when prompted.
The number that you said is repeated through the earpiece then your phone will dial the
number.
Name Dialing
To use Name Dial, you’ll need to have entries stored in your Phonebook. See ‘Section 6: Phonebook” on
page 43 for information on creating Phonebook entries.
1. In Idle mode, select the VoiceSignal shortcut (Right Navigation key). You can also select
Voice recognition from the Utilities menu in Applications.
2. After a brief pause, a list of optional commands appears on the display and the audio prompt
“Say a command” plays through the earpiece.
3. Say “Call” and the name of the contact that you want to dial.
The name that you said is repeated through the earpiece and your phone dials the number.
4. If VoiceSignal is not sure of the name that you said, a list of possible matches appears on the
display. You are asked to confirm the correct number as VoiceSignal displays the results. Say
“Yes” or “No” to confirm or reject the number when prompted.
The number that you said is repeated through the earpiece then your phone will dial the
number.
