56
9. After selecting or entering the destinations, press the Select soft key or .
To add another destination, select an empty To field, press the Options soft key. Repeat from
step 7.
Note: When entering multiple destinations, you can also choose Group, Save to Drafts, Change
recipient, and Back options in addition to the other send options.
10. When you have finished entering the destinations, press the Options soft key. Highlight Send
and press the Select soft key or . Your phone sends the message.
Composing and Sending a PIN message
A personal identification number (PIN) uniquely identifies each device on the network. If you know
another person’s PIN, which consists of 8 alphanumeric characters, you can send a PIN message to that
person by entering the PIN as the destination.
Note: A PIN number is obtained when your device is provisioned for the BlackBerry Enterprise Server.
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Messages and press the Select soft key or .
3. Press the Compose soft key.
4. Highlight PIN message and press the Select soft key or .
5. Select the PIN from the PIN number list or highlight PIN address and press the Select soft
key or . If you select PIN address, enter the PIN number and press the OK soft key or .
6. Enter the message subject and press the Down Navigation key.
7. Enter the message text.
8. When you have finished entering your message, press the Options soft key. The following
options are available:
• Send: allows you to send the message.
• Add address: allows you to enter additional to, cc, bcc addresses.
• Save to drafts: saves the message as a draft for sending at a later time.
• Options: allows you to set the importance level and sensitivity level of the message.
• Language select: allows you to set the language to English, French, or Spanish.
• Speedy word: allows you to set the Speedy word input method as a default when
creating a message.
9. Highlight Send and press the Select soft key or . Your phone sends the message.
