Getting Started 6
2.
Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the lower right side of
your phone.
Important!:
You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Low battery indicator
The battery indicator ( ) in the upper-right corner of the
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
•
Five bars ( ) indicate a full charge.
•
An empty battery icon ( ) indicates a near empty battery.
•
A blinking empty battery icon ( ) and a tone sounding indicate you
have two to three minutes before the battery is too low to operate the
phone.
If you continue to use your phone without charging its battery, the
phone will shut down.
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
Turning Your Phone On
1. With the phone open, press the key until the display
lights.
Note:
As with any other radio-transmitting device, do not touch the antenna
while using your phone as this can affect call quality and can cause the
phone to operate at a higher power level than is necessary.
2. The phone begins searching
for a network signal. Once
the phone finds a signal, the
time, date, and day appear
near the top of the display.
You’re now ready to place
and receive calls.
Note:
If you are outside of your carrier’s
coverage or roaming area, the No
Service icon ( ) appears at the
top of the phone’s display. If you
cannot place or receive calls, try
later when service is available, or at
another location.
Press
& Hold
Internal
Antenna
