Filter
Top Products
Appendix A: Options and Accessories
TDS 520A, 524A, 540A, & 544A User Manual
Table A-3: Probe Accessories (Cont.)
Accessory Part Number
Six-inch Alligator Clip Ground Lead 196–3305–00
Screwdriver: adjustment tool, metal tip 003–1433–00
SMT KlipChip
TM
206–0364–00
Accessory Pouch 016–0708–00
You can also order the following optional accessories:
Table A-4: Optional Accessories
Accessory
Part Number
Service Manual 070–8713–01
Plotter (GPIB and Centronics Standard) HC100
Oscilloscope Cart K218
Rack Mount Kit (for field conversion) 016–1136–00
Oscilloscope Camera C9
Oscilloscope Camera Adapter 016–1154–00
Soft-Sided Carrying Case 016–0909–01
Transit Case 016–1135–00
GPIB Cable (1 meter) 012–0991–01
GPIB Cable (2 meter) 012–0991–00
Accessory Probes
The following optional accessory probes are recommended for use with your
digitizing oscilloscope:
P6101A 1X, 15 MHz, Passive probe.
P6156 10X, 3.5 GHz, Passive, low capacitance, (low impedance Z
O
)
probe. Provides 100X, when ordered with Option 25.
P6009 Passive, high voltage probe, 100X, 1500 VDC + Peak AC.
P6015A Passive high voltage probe, 1000X, 20 kVDC + Peak AC
(40 kV peak for less than 100 ms).
P6205 750 MHz probe bandwidth. Active (FET) voltage probe.
Optional Accessories