Filter
Top Products
Reference
Waveform Integration
Advanced DSP Math
(optional on TDS 620A & TDS 640A), provides
wave-
form integration
that allows you to display an integral math waveform that is
an integrated version of the acquired waveform. Such waveforms find use in
the following applications:
Measuring of power and energy, such as in switching power supplies
Characterizing mechanical transducers, as when integrating the output of
an accelerometer to obtain velocity
The integral math waveform, derived from the sampled waveform, is com-
puted based on the following equation:
Where: x(i) is the source waveform
y(n) is a point in the integral math waveform
scale is the output scale factor
T is the time between samples
Since the resultant math waveform is an integral waveform, its vertical scale
is in volt-seconds (its horizontal scale is in seconds). The source signal is
integrated over its entire record length; therefore, the math waveform record
length equals that of the source waveform.
To obtain an integral math waveform:
1. Connect the waveform to the desired channel input and select that chan-
nel.
2. Adjust the vertical and horizontal scales and trigger the display (or press
AUTOSET).
3. Press MORE ➞ Math1, Math2, or Math3 (main) ➞ Change Math wave-
form definition (side) ➞ Single Wfm Math (main).
4. Press Set Single Source to (side). Repeatedly press the same button
until the channel source selected in step 1 appears in the menu label.
Description
Operation