Filter
Top Products
Industrial Control Transformers
Fuse Protection
39
08/2005
© 1999–2005 Schneider Electric All Rights Reserved
NOTES:
• These fuses are not supplied by Schneider Electric.
• This table is provided for primary fusing recommendation ONLY. Secondary fusing must be specified by the customer.
• All primary fuse options offered by Schneider Electric require rejection type fuses.
Accessories
Fuse Sizing, Description, and Catalog Number (by manufacturer)
Size Description
Manufacturer
Bussman Littlefuse Gould-Shawmut
1-1/2-inch x 13/32-inch
“Midget Fuse”
Time Delay, Rejection Type
Class CC
FNQ-R
LP-CC
KLDR
KLMR
ATDR
ATQR
ATMR
1-1/2-inch x 13/32-inch
“Midget Fuse”
Time Delay FNM; FNQ FLQ; FLM; FLA ATQ; TRM; GFN
1-1/4-inch x 1/4-inch Time Delay TDC-11; MDL; MDQ: MDA
3AG: 313/315
3AB: 326/325
GDL
Fingersafe
®
Covers (not supplied with unit)
Class Type
VA Accessory Key
1
Description
IIIIII
9070
FSC-1
FSC-2
FSC-23
25–200 VA
250–5000 VA
N/A
25–100 VA
150–5000 VA
N/A
N/A
N/A
25–5000 VA
2 covers per kit
1
Kits must be ordered separately. Also supplied in bulk packages of 100 individual covers.
Add “B” to Type number if ordering bulk (available only on FSC-1B and FSC-2B)
Fuse Puller—For ease in installing fuses and finger protection, used with fuse blocks with 1-1/2 in. x 13/32 in. fuses
Class Type
VA Accessory Key
Description
IIIIII
9070 FP-1 ALL ALL ALL
Fuse puller kit may help comply with CE
specifications, 3 pullers per kit.