Precor EFX 532 Scale User Manual


 
page 19
COMMERCIAL PRODUCTS DIVISION
Note: The odometer and hour meter are updated at the end of each course. If the
course is terminated by turning off the power, the data for that course is lost.
Press Enter again and the unit’s three digit Software Version (V1.23, for
example) and Part Number (38314-123, for example) appear on the display.
This information is useful when ordering parts.
Press Enter once again and the Error Log appears. The EFX stores the last 10
errors that have been detected. Press the or key to view each error mes-
sage. To return to the Precor banner, press Enter or Reset. An example of a
recorded error message appears below:
5: ER42 1234 STRIDES 5678 HOURS
Note: To clear (delete) the error log, press Quick Start and Reset simulta-
neously for at least 4 seconds while viewing the list. Prompts appear on the
display and let you know when the error messages have been deleted (“cleared”
from memory).
Important: You cannot retrieve the error log once you have deleted it.
Indicates sequence.
(5
th
error in Log)
Stride count when
error occurred.
Hour meter reading
at the time the error
detected.
Indicates the type of error.