Filter
Top Products
page 10
COMMERCIAL PRODUCTS DIVISION
HARDWARE KIT
Carefully unpack the parts from the shipping container. Open the Hardware kit
and make sure that you have the following items as shown in Diagram 1:
(A) two buttonhead hex screws—water bottle cage assembly
(B) two lock washers—water bottle cage assembly
(C) tie wrap—handrail cable assembly
(D) 5/32" hex key—tightens screws on water bottle cage
(E) 1/4” hex key— upper column assembly (Note: A hex torque wrench is
also required, although it isn’t supplied.)
(F) Power cord
If any items are missing, contact your dealer. For the Precor authorized dealer
or servicer nearest you, call 1-888-665-4404.
Note: After assembling the EFX, be sure to store the hex keys in a secure place.
The tools are used for maintenance procedures that are described in this manual.
Diagram 1
EFX532
Hardware kit
D
F
ACQUIRE THE APPROPRIATE TOOLS
Obtain the following tools
before
assembling the EFX.
Wire cutter
Duct tape (or similar strong adhesive tape)
Hex torque wrench
AB
C
E