Filter
Top Products
35
En
Basic Operations
06
English
Setting MTS/SAP mode
When watching conventional TV programs, you may enjoy
stereo sound and/or Secondary Audio Programs (SAP), using
the Multi-channel Television Sound (MTS) function.
• Stereo broadcasts
You can enjoy, for example, sports, shows, and concerts in
dynamic stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in
mono or stereo).
SAP sound: Listen to second language, supplementary
commentary and other information. (SAP is mono sound.)
NOTE
• Conventional TV channels in this manual designate TV
channels that are received through the conventional VHF/
UHF frequencies or conventional cable TV channels.
• When stereo sound is difficult to hear, you may manually
switch to the MONO mode to obtain clearer sound.
• Once the MONO mode is selected, the Plasma Display
System sound remains mono even if the system receives a
stereo broadcast. You must reselect the STEREO mode if you
want to hear stereo sound again.
• Selecting MTS while the input source is INPUT 1 to 6 or PC
does not change the type of sound. In this case, sound is
determined by the video source.
Each time you press MTS, MTS toggles as shown below.
NOTE
•The MTS button is disabled while the TV Guide On Screen™
system is displayed.
• In each of the MTS/SAP modes selected, the display
changes depend on broadcast signals being received.
When receiving STEREO sound signals
When receiving MONO + SAP sound signals
When receiving STEREO + SAP sound signals
When receiving MONO sound signals
STEREO
STEREO mode
SAP
SAP mode
MONO
MONO mode
A 125
STEREO
In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO
A 125
MONO
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO (SAP)
A 125
SAP (MAIN)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
STEREO (SAP)
A 125
SAP (STEREO)
A 125
MONO (SAP)
In STEREO mode
In SAP mode
In MONO mode
A 125
MONO
A 125
MAIN
A 125
MONO
PDP6070HD.book Page 35 Friday, May 19, 2006 5:01 PM