Filter
Top Products
32
En
Basic Operations
06
Basic Operations
Turning on the power
(from standby mode)
1 Press a POWER on the Plasma Display if the POWER ON
and STANDBY indicators are off.
• The STANDBY indicator on the Plasma Display lights up
red.
2 Confirm that the STANDBY indicator lights up red, and
then press TV a on the remote control unit or STANDBY/
ON on the Plasma Display to turn the system on.
• The POWER ON indicator on the Plasma Display lights
up blue.
Turning off the power
(to standby mode)
1 Press TV a on the remote control unit or STANDBY/ON
on the Plasma Display.
• The system enters the standby mode and the image on
the screen disappears.
•The STANDBY indicator lights up red.
• This will allow the system to automatically receive digital
TV program information while in the standby mode.
NOTE
• If you are not going to use this system for a long period of
time, remove the power cord from the power outlet.
Plasma Display status indicators
The table below shows the operational status of the Plasma
Display System. You can check the current status of the system
with the indicators on the Plasma Display.
For other than the above, see “Troubleshooting”on page 91.
CAUTION
• While the POWER ON and STANDBY indicators are off, the
system cannot be placed into the power-on mode even when
TV a or STANDBY/ON button is pressed. Make sure to
press POWER and see if the standby indicator lights up red.
• The Plasma Display System will still consume some power
as long as the power cord is inserted into the power outlet.
Plasma Display
(PDP-6072HD/PDP-6071HD/PDP-6070HD)
(PDP-5072HD/PDP-5071HD/PDP-5070HD)
(PDP-4272HD/PDP-4271HD/PDP-4270HD)
Viewed from below of the display (left).
Indicator
Status
System Status
POWER ON STANDBY
The power cord of the Plasma Display has
been disconnected or the POWER button
on the Plasma Display is off.
Power to the system is on.
The system is in the standby mode.
REC TIMERSTANDBYONPOWER
REC TIMER indicator
POWER ON indicator
POWER
button
STANDBY indicator
ON STANDBY
POWER
STANDBY indicator
POWER ON indicator
POWER
button
REC TIMERON STANDBY
STANDBY
indicator
POWER ON
indicator
POWER
button
STANDBY/ON
button
(Right side view)
PDP6070HD.book Page 32 Friday, May 19, 2006 5:01 PM