Filter
Top Products
11
En
Safety Precautions
02
English
Installation Precautions
Observe the following precautions when installing with any
items such as the optional bracket.
When using the optional brackets or equivalent
items
• Ask your dealer to perform the installation.
• Be sure to use the supplied bolts.
• For details, see the instruction manual that comes with the
optional bracket (or equivalent items).
When using other items
• Consult your dealer.
• The following six mounting holes (four holes for the PDP-
6072HD/PDP-6071HD/PDP-6070HD) can be used for the
installation:
Rear view (PDP-6072HD/PDP-6071HD/PDP-6070HD)
Rear view (PDP-5072HD/PDP-5071HD/PDP-5070HD)
Rear view (PDP-4272HD/PDP-4271HD/PDP-4270HD)
Side view
CAUTION
• Be sure to use four or more mounting holes symmetrical to
the vertical and horizontal median lines.
• Use M8 screws, which go 12 mm to 18 mm (1/2 inches to
11/16 inches) in depth from the mounting surface of the
Plasma Display. See the side view above.
• Be careful not to block the ventilation opening at the rear of
the Plasma Display.
• Be sure to install the Plasma Display on a flat surface
because it contains glass.
• The screw holes other than the above are to be used only for
the specified products. Never use them for mounting non-
specified products.
NOTE
• It is strongly recommended to use the optional PIONEER
mounting products.
• PIONEER shall not be liable for any personal injury or
product damage that results from the use of mounting items
other than the optional PIONEER products.
Mounting
hole
Mounting
hole
Median line
Median
line
Mounting
hole
Mounting
hole
Median line
Median
line
Mounting hole
Median line
Mounting
hole
Median
line
Mounting surface
Plasma
Display
Mounting
bracket (or
equivalent item)
M8 screw
12 mm to 18 mm
(1/2 inches to 11/16 inches)
PDP6070HD.book Page 11 Friday, May 19, 2006 5:01 PM