■■■ Protecting the environment
33-38 When eventually discarding your shaver
please remove the rechargeable batteries and
dispose of them at an officially assigned refuse site.
Please note: You can also take the appliance to a
Philips Service Centre. The staff will be happy to help
you.
- (Fig. 33) First ensure that the shaver is
disconnected from the mains supply.
- Before removing the batteries should be
completely empty. Let the appliance run until the
motor stops.
- (Fig. 35) Use a small screwdriver (blade width
approx. 3 mm) or a Torx T-8 type screwdriver.
- (Fig. 37 & 38) The batteries may be recognised by
the print NIMH.
Do not connect the appliance to the mains supply
after the batteries have been removed.
15
36
37
34
35
33
38