Filter
Top Products
Doing a Daily Check
Look through the small hole in the test
strip holder to make sure there is no lint,
dirt, or blood blocking it.
If there is anything blocking the hole, or
if the test area has dirt, lint, or blood
on it, remove the test strip holder and
clean the test area by following the
instructions in the next section. Then
do a check strip test (see page 14).
Cleaning the Meter
Clean the meter and test strip holder:
■
At least once each week
■
Whenever the test area looks dirty
■
Whenever
clean
test
area
appears on the display
73
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 73