Filter
Top Products
Once the Clock option is set to ,
you are ready to set the time.
If you do not want to display the time
and date, press the C button to turn the
Clock option to .
Setting the Time
Enter the set-up mode and set the Clock
option to (see page 47). Use the
M button to display the current time
setting. Press the C button to change
Note: The meter records the time
and date of each test even when the
Clock option is set to . They
can once again be seen by turning
the Clock option to .
Note: The first time you enter the
set-up mode, the Clock option will
be preset to . To set the Clock
option to , see page 47, “Entering
and Using the Set-Up Mode.”
50
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 50