Filter
Top Products
Be sure that you:
■
Touch only the tip
of the drop of
blood to the test
spot.
■
Apply enough
blood to form a
round, shiny drop
that covers the test
spot completely
and stays wet during the entire test.
■
Do not smear blood on the test spot
or apply a second drop after the test
begins.
■
Do not move the test strip as you are
applying blood. If the test strip
moves, push it back into its original
position.
■
Do not remove the test strip from the
meter to apply blood.
■
Do not touch or move the test strip
once the count has begun.
If the Beep option is set to , the
meter will beep when the blood is
applied to the test spot. See page 39,
“Checking the Amount of Blood on the
Test Strip.”
M
C
36
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 36