Lifescan Basic Blood Glucose Monitoring System Blood Glucose Meter User Manual


 
How to Test Your Blood
Step 1: Press On/Off Button. Make
Sure Code Number Displayed on Meter
Matches Code Number on Test Strip
Vial. Insert Test Strip.
Make sure the test strip holder is
properly in place. (See page 77). Turn
your meter on. All display symbols will
appear. The last test result (or, when
you first use the meter, the message
nodata) will then
automatically appear
on the display for
several seconds.
Your current test strip code appears
next, followed by check code and
then
(Example)
Make sure the code number on the
meter display matches the code
number on the vial of OneTouch
®
Basic
®
,
Profile
®
, OneTouch
®
II Test Strips you are
using. (When you first use the meter,
code-- will appear, indicating that
there is no code stored in the
memory.) If the code numbers do not
match, code the meter. (See page 11).
(Example)
C
M
33
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 33