Filter
Top Products
How to do a control solution test:
Step 1: Press On/Off Button. Insert
Test Strip.
The code number
that appears on
the meter display
should match
the code number
on the test strip vial.
When insert
code10 (Example)
strip appears,
slide a OneTouch
®
Basic
®
, Profile
®
,
OneTouch
®
II Test Strip into the test strip
holder, notched end first, with the test
spot facing up.
Make sure you push
the test strip in all
the way until it stops.
wait appears for
a moment, then
apply sample
appears for five
minutes or until
you apply a drop of
control solution to the test spot on the
test strip.
M
C
M
C
21
(Example)
DCO_06331801A_OTB_OB_US 11/25/03 3:27 PM Page 21