Filter
Top Products
56
Instruction manual V 1.4 – 02/2007
2
4
5
6
6. Optional accessories
6.9 Cold light source
6.10 Fiber-optic light guide
Fig. 62, Leica rotary microtome with installed optional
accessories: magnifying lens and fiber-optic light guide
Fig. 58
Fig. 60
Fig. 59
The cold light source may be operated
at the power supply voltage specified on
the identification label (on the underside
of the instrument) only.
• Connect the power cable (1) to the connect-
ing jack on the rear of the device.
• Plug the power plug into the power socket.
Carefully read the instruction manual
provided separately before use!
• Attach the fiber-optic light guide (2) to the
adapter of the magnifying lens and secure it
in place in the bore (6) using the screw (5).
•
Pull off the protective cap (3) from the end of the
fiber-optic light guide and keep it in a safe place.
• Insert this end into the opening provided (4)
until it engages with a slight click.
• Switch on the Cold light source using the
power switch (7).
• Remove the protective caps (8) and align the
light guide with the specimen.
1
3
7
8